Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: coss on July 03, 2009,04:23:57
-
Hello all,
im having problems with a LCD KDL-26S2000, chassis WAX2
it starts up changing the power led from red to green, image only appears for 2 seconds with no sound.
The picture seems normal but just a bit short on the horizontal, osd ok, then goes off, relay clicks and led always green.
This reapeats three times, after that stays dark with red led blinking 9 times! (yes i am counting it right)
I have the service manual but it only mentions 8 error codes...
Any idea whats hapening and why the error code is not on the manual?
Thanks a lot