Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: mzone on July 07, 2009,13:17:59
-
Hello, we have a lg plasma LG RZ-42PX11 in for repair I just notice there is a black vertical line down the center from above i have .resoldered the 4 x resistance 100 ohm resistors on the pdp COF flat ribbon in case of cold solder joints. & does not seemed to have helped as tv still has black vertical line. anyone help?
thankyou
-
Hi, the last one i had in with this fault turned out to be the pdp!
But i have had the on film chip go aswell as bad conections from the board!
-
I also have this problem~~~