Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: sparky on July 16, 2009,08:50:19
-
Help
when switched green light then the red flashes 3 times then waits and starts
again there his no sound or pic and no signs of backlight flicher
this was bought from tesco 16 months ago sony clone? every one say's
no good cheap sony?
sparky
-
Check the 3 SMD fuses on the inverter PCB, there is also one on the LVDS pcb
-
Hi
Keith have checked the fuses on inverter pcb before all ok,
dismantled to check screen driver board fuses ok checked
5v no volts none , disconnected plug the 5v present and backlighters
light up cannot measure any shorts any suggestions please
sparky
-
Sorry Sparky, I have only had problems with fuses on these.
The service manual is available in the download section, maybe that will help!
I will ask a few friends too
Keith
-
Thanks for trying ,the service manual does't show
screen driver pcb comes with complete screen assembly
sparky
-
:yahoo:
dismantled screen driver pcb
checked nearly all cap's after 3 hours found
one measured 160 ohm's unsoldered and replaced
with new one cured
sparky
-
Hi Sparky,
You, now, as a happy 'TV mended' Quuq guy. So which cap, when replaced, did the business. Well we are here for everyone, do tell, so we can help other folks - Chris.
-
hi
sorry about that (sm cap c528 )not sure value, I had panel
from 32 goodmans which looked the same transferred cap
cured
sparky
-
Thanks for your Q
i get the answer,too.
-
Thanks for youe information
I really appreciate that!
-
wow
really thanks