Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: kencan on July 16, 2009,16:00:38

Title: magnavox funai model mwc20t6
Post by: kencan on July 16, 2009,16:00:38

model mwc20t6 tv/vcr/dvd combo
will not power up
when power button is pressed red led on front comes on and then i hear clicking and then nothing else
found open zener replaced now blowing fuse
any advice what to look for next
i do not have a service manual

any help
thanks
ken

Title: Re: magnavox funai model mwc20t6
Post by: amin on July 17, 2009,14:32:03

hi first of all u should mention where the zener u have replaced?incold side or the hot side?by ur description ,i can assume that there is somewhere a s/c.i do not know this model n make , i have never come to know this set but one or another the basic principles r the same.the cliking as u say is it the relay that is chattering ,if it is so then the psu have a big problem.u should check the switching transistor,the parts around,the line o/p transistor n even the line transformer.best of luck

Title: Re: magnavox funai model mwc20t6
Post by: DesperateHousewives on July 25, 2009,22:49:57

I feel so happy about your Q