Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: WILLYAM1 on August 18, 2009,16:07:15

Title: HITACHI42PD300TA-PDP42V6
Post by: WILLYAM1 on August 18, 2009,16:07:15

NO POWER NO STBY RED.
CHANGED ON PS R004 10(OHM\5W) Q301 2SK2717 D017YG97256.
TV IS WORKING BUT WITH SPOTS ON SCREEN.
FOUND ANDCHANGE 3 SMALL CAPI 33UF\25 ON Y SUS(6871QYH029A).
NOW LESS SPOTS BUT NO CHANGE AFTER ADJUSTING TRIMERS(KNOB).
ANY ADIA???(I DIDNT ADJUST UP AND DOWN).
THANKS IN ADVANCE WILLYAM1

Title: Re: HITACHI42PD300TA-PDP42V6
Post by: WILLYAM1 on November 18, 2009,15:25:02

hi everyone.
need a part list of power supply.
 its the same p.s of many hitachi models such 42pd4200.
 willyam1

Title: Re: HITACHI42PD300TA-PDP42V6
Post by: WILLYAM1 on November 18, 2009,15:30:17

after it was repiared after1 week the same parts failed again and again.......
part list pleese maybe i changed between the fets tran??.
willyam1

Title: Re: HITACHI42PD300TA-PDP42V6
Post by: Turnip on November 19, 2009,05:45:22

Hi Willyam1
 This might help - Chris

Title: Re: HITACHI42PD300TA-PDP42V6
Post by: WILLYAM1 on November 22, 2009,13:22:41

thanks chris very good for service and understanding but no help for componenet list.
any one has  or can check about power supply PCPF0058-MPF7414.
can anyone tell me if .
q320-2sk3699.
q301-2sk2717.
q201-2sk3535.
q220-2sk3535.
willyam1

Title: Re: HITACHI42PD300TA-PDP42V6
Post by: mulja on November 27, 2009,12:16:50

I have power supply MPF7414 not new but 100% working

if you need one contact me by Private messages

 :brinda: