Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: nac on September 16, 2009,08:34:36

Title: ATEC PSU Problem
Post by: nac on September 16, 2009,08:34:36

Hi All,

I'm having a problem with my ATEC av370WD LCD TV. It started when the TV would go into standby during normal use (it would start up again after a couple of seconds).

Now the set won't even turn on. The front LED is just orange (normally green or red) and the screen doesn't turn on.

Searching the net it appears this is a common problem with the PSU.
Does anybody know how to fix these, or better still somebody who could fix the PSU.

Cheers

** Removed my previous thread as it didn't work after I tried to upload a photo of the PSU! **

Title: Re: ATEC PSU Problem
Post by: cartman9090 on September 17, 2009,18:18:12

Quote from: nac on September 16, 2009,08:34:36

Hi All,

I'm having a problem with my ATEC av370WD LCD TV. It started when the TV would go into standby during normal use (it would start up again after a couple of seconds).

Now the set won't even turn on. The front LED is just orange (normally green or red) and the screen doesn't turn on.

Searching the net it appears this is a common problem with the PSU.
Does anybody know how to fix these, or better still somebody who could fix the PSU.

Cheers


sir, I have the same problem, let me know if yoy find out anything. So far, I only found a defect electrolytic capacitor.

** Removed my previous thread as it didn't work after I tried to upload a photo of the PSU! **

Title: Re: ATEC PSU Problem
Post by: dieweaver on September 28, 2009,19:42:00

Had The same problem back in august found that 4 of the capacitors had blown the tops had bubbled had to get the replacement from RS they seemed tobe the only ones that stocked "105deg temp caps"