Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: astracat on September 23, 2009,16:28:28
-
hi all
have above model with red speckles in top left corner any ideas how to get rid of them,originally all 1000uf caps in psu were bad which are now replaced also ysus board replaced careful adjustments have helped with the speckles but wont improve anymore anyone have an update for this to see if that would cure
thanks for looking and any help or suggestions are appreciated
astracats
-
Hi Astracats,
Checked back, and there's a link suggesting replacing the control board might help.
Best of luck - Chris.
-
hi turnip
thanks for info will give it a try as soon as i get one, will post results for everyone when done
astracats
-
replaced control board now ok
thanx for suggestions
astracat