Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: daz on September 27, 2009,05:08:51

Title: whafedale l32ta6a
Post by: daz on September 27, 2009,05:08:51

does anyone know how to enter the service mode on this model,i belive its listed on the euras web site but im to tight to subscribe.

Title: Re: whafedale l32ta6a
Post by: tv john on September 27, 2009,16:44:32

Hi daz,I'm scottish and I subscibe. Try i button and punch in 8500 on r/c.

Best of luck, tv john.

Title: Re: whafedale l32ta6a
Post by: daz on September 29, 2009,09:36:44

thanks john
but it didnt work,any ideas?

Title: Re: whafedale l32ta6a
Post by: sparky on September 29, 2009,09:50:43

hi
what is the nature of your tv fault
sparky

Title: Re: whafedale l32ta6a
Post by: daz on September 29, 2009,10:46:42

hi sparky
the set had a psu fault which is now fixed,everything works except the picture is quite dark,the brightness works ok upto the value of 50 but starts to get darker as you go past that value,looks like the eprom has glitched and the pre set values need increasing.

Title: Re: whafedale l32ta6a
Post by: sparky on September 29, 2009,12:34:51

12. SERVICE MENU SETTINGS
To enter the service menu, first enter the MENU by pressing “MENU” button and then press the digits 4, 7, 2
and 5 respectively.
12.1. Picture Adjust
• Source => All possible sources given with the chasis as a list.
• Mode => Three items as a list; NATURAL, DYNAMIC, CINEMA
• Colour Temp => Three items as a list; COOL, NORMAL, WARM
• Contrast => Slider Bar. Changing value between 0 to 63.
• Brightness => Slider Bar. Changing value between 0 to 63.
try this
sparky

Title: Re: whafedale l32ta6a
Post by: daz on September 30, 2009,04:05:04

thanks sparky
 tried that first but its not a vestel chassis
god knows who made it.

Title: Re: whafedale l32ta6a
Post by: sparky on September 30, 2009,06:18:05

hi
post pic of board see if i can reconise it
sparky