Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: Turnip on October 11, 2009,11:03:00

Title: Bush 1489Tsil Beko 12.7 chassis
Post by: Turnip on October 11, 2009,11:03:00

Hello folks,

  Have one of these where field height was excessive. Service menu, and reduced to the minimum obtainable that gave correct height and lin, but 16:9 could not be adjusted down to the correct level.

  Suspect fault is in the field output area, anyone had the problem ?

  In hopes - Chris.

Title: Re: Bush 1489Tsil Beko 12.7 chassis
Post by: sparky on October 11, 2009,16:29:21

hi
is it a wide screen tv?

Title: Re: Bush 1489Tsil Beko 12.7 chassis
Post by: Turnip on October 12, 2009,04:34:55

Hi,

   No it's a 14'' 4:3   - Chris.

Title: Re: Bush 1489Tsil Beko 12.7 chassis
Post by: sparky on October 12, 2009,05:19:02

hi
thats why 16.9 cannot be set,check frame stage components
spply from line stage 25v?

Title: Re: Bush 1489Tsil Beko 12.7 chassis
Post by: tv john on October 13, 2009,06:38:39

Hi ,check C509/510 .    John.

Title: Re: Bush 1489Tsil Beko 12.7 chassis
Post by: Turnip on October 16, 2009,09:08:09

Thanks John,

   Feedback path - should have thought    Thanks - Chris.