Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on October 22, 2009,13:48:35

Title: LCD MAG MODEL 3200 -RX326
Post by: WILLYAM1 on October 22, 2009,13:48:35

HI EVERYONE.
problem no led in front(POWER ON LED).
p.s is always working 12v ok 24v ok(pin power on is always on 3.9v).
MAIN BOARD VALTAGE; 5V  3.3V 2.5V 1.8V ALL OK.
Ithink micropros or eeprom??? .
anyone hade asame problem.
main board no' is 200-100hx276-e.
inverter dont work no backlight.
willyam1

Title: Re: LCD MAG MODEL 3200 -RX326
Post by: avibp on November 30, 2009,23:10:59

I hope someone helps out with this one. 
Similar problem here on same model. 
I know that a quick off/on of electricity in the area preceded this issue on this set. 
Unlike WILLYAM1, I am unsure of the voltages on the PS. 
Will be testing tomorrow. 
First fuse outside immediately next to the power plug. 
Second fuse immediately next to the input on the PS. 
any HELP is appreciated ( :wink1: or maybe it is just the fuse :wink1:)