Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: t1412 on November 28, 2009,17:53:33

Title: BUSH IDLCD37TV07HD
Post by: t1412 on November 28, 2009,17:53:33

ok chaps got this tv  in it's a bush IDLCD37TV07HD semi dead theres 322 volts at the filter cap thats it t1 transformer quite warm power supply is a FSP312-2MO1 any help would be great thanks

shaun  :ciao:

Title: Re: BUSH IDLCD37TV07HD
Post by: sparky on November 29, 2009,04:40:02

do you get any standby lights when switched on?
and have you checked the caps in psu

Title: Re: BUSH IDLCD37TV07HD
Post by: t1412 on November 29, 2009,05:14:01

ok sparky no lights at all. i haven't check any cap yet thanks

shaun :1st:

Title: Re: BUSH IDLCD37TV07HD
Post by: t1412 on December 12, 2009,13:04:41

right change the capacitor in the power supply tv sprang to life. turned tv off at the switch and unpluged it from the wall pluged it back in again tv not working this happen every time got any clues cheers

shaun :wallbash:

 

Title: Re: BUSH IDLCD37TV07HD
Post by: sparky on December 12, 2009,16:06:15

hi
when in fault condtion warm the elcos you have not changed and see if it
comes on any quicker if so use freezer to cool down to find faulty one

Title: Re: BUSH IDLCD37TV07HD
Post by: t1412 on December 15, 2009,15:10:49

ok sparky tv working ok there were some 47mf 35v caps that i missed thanks for the tips

shaun :1st: