Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: Turnip on December 04, 2009,08:02:37
-
Hi Folks,
Have one of these where Tv works fine, but although video mode changes are indicated on screen no functions work - cassette loaded.
Any thoughts - Chris.
-
hi chris
had similar faults on a slightly different model
try giving the mode switch a clean or if it uses a capacitor as a back up battery short it out to flatten it then re start the set.
hope it helps
daz
-
Hi, and thanks Daz,
Tried those, but now Cust has given up hope, so down to the local tip for a good replacement.
Recycling 'R' us - Esp. if it's cheap - well always is, but bit of a wait, perhaps - Chris.