Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on December 07, 2009,06:36:03
-
Hi everyone.
problem is no picture sound o.k.
power supply all voltage are ok 12v 24v 5v 3.3v.
back light is on and inverter is working.
no picture no o.s.d.
main board is 17mb22-2( 3.3v 1.8v 5v 8v all ok in main board)is the problem in main (control ) or in lvds board.
anyone hade same problem??? plees need help.
thanks willyam1
-
hi
try using scart out of you tv into another tv or dvd
if it shows pic from your tv could be screen
drive panel
sparky
-
hi sparky.
no output from scart what could be the problem?
-
hi
do you still get sound on faulty lcd when scart connected
and on other tv?
-
hi again sparky.
still got sound un lcd tv when its conected to scart but no sound andno video in conected tv.
willyam1
-
on the other tv do you switch to av input
or scart in
-
hi sparky .
defently in av.
willyam
-
hi
had a samsung last week i found with workshop lights of
the screen just lite,dismantled screen drive panel one
of fuses o/c replaced fuse gingerly panel worked ok
sparky
-
i allready dismentel lvds board i didn't found any smd fuse.
another idea???.
willyam
-
stumped sorry
-
any way many thanks for trying i will make more checking will keep you posted.
by the way the lvds board is320tc42v1.0.
could it be the eprom???
-
hi
i was thinking if the setting for brightness had been
corrupted eprom could be causing, like you get with
crt vestel chassis jvc
-
hi sparky.
do you have an eprom or software?
-
sorry no
try charles hyde or wiltsgrove
-
hi sparky.
sucses.
asi told befor 2 is better then 1.
after digging by schema i founs a smd resistor(s467)in main board open this sould lead 3.3vto lvds cabel pin21 i repleces a 0ohm smd .
after power on half of the picture was visible and half was whith vertical lines.
found a smd fuse in LVDS BOARD I REPLECED IT WITH A 0 OHM SMD RESIS.
TV IS WORKING FINE ABOUT A 1 HOUR.
THANKS SPARKY FOR ALL YOUR AFORTS.
WILLYAM1