Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Turnip on December 09, 2009,09:16:12

Title: Toshiba 15V330DB
Post by: Turnip on December 09, 2009,09:16:12

Hi Folks,

Have one of these where at switch on, OSG with preferences appears, only move from which is initial digital scan. Set tunes - all seems OK, all channels available.

After switching off and back again, same thing happens, not possible to view without re-scan. Tried Tosh for operating manual - not helpful site.

Any thoughts - Chris.

Title: Re: Toshiba 15V330DB
Post by: brainstorm on December 09, 2009,10:13:12

Hi Chris,
I have sent you a software update you can try

Kind regards

Brian

Title: Re: Toshiba 15V330DB
Post by: Turnip on December 09, 2009,11:42:31

Thanks Brian,

Deep into thermionic valves at this moment, but will try update tomorrow, and give a modern reply without secondary emissions.

Us old folks have such a wealth of acceptable expressions, sorry for those younger folks, with just emitters, sources and such - blame the Beatles, and Mary W  - Chris.

Title: Re: Toshiba 15V330DB
Post by: Turnip on December 11, 2009,11:51:08

Hi Brian

Thanks again, Checked with CPC and those bits for the biz required, ordered. Think this might just be a loss leader, but as most recent Vestels' have sockets just for such fun. Did they suspect future problems ? - well after that later tubed stuff, we might well suspect that they did.

Thanks again - Chris.