Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: ANGRY_OZY on January 06, 2010,18:41:56

Title: Goodmans GTV42P6 ( BEKO PSU 03 Diagrame / Picture )
Post by: ANGRY_OZY on January 06, 2010,18:41:56

Hi i have one of these plasmas, and one day it just went black! :oops:, it powers on but the screen is black. So i took the back off and had a look, and on the one of the board ( BEKO-PSU-03), the fuse had blown and one of the IC chips had blown. I found a replacement board but its for the Wrong model of TV,

http://www.chsinteractive.co.uk/electrical-components/misc/goodmans-gtv42p4-pcb-power-supply-r84-194r-5-beko-psu-01-ew5-140-p7-tft-pdp-tv-pow-supply.htm

So i was going to change the fuse and the IC chip but i can only find half of the Top of the chip the rest must have got blown up  :laugh1:

If any one could tell me where to get another board from or what the IC chip is thanks

                                                                        ______
Ps what i can see of the chip says                          \ D200 \
                                                                          \ E52  \
                                                                           -------    (Sorry for the poor "sketch")
                                   

 

Title: Re: Goodmans GTV42P6 ( BEKO PSU 03 Diagrame / Picture )
Post by: ANGRY_OZY on January 06, 2010,18:53:40

Solved !


I found this KIT

http://www.chsinteractive.co.uk/electrical-components/general-components/kits-repair-modification-and-upgrade/goodmans/repair-kit-psu-bw1-194r-beko-board-used-in-goodmans-gtv42ps.htm


Hope this helps someone else cheers

Title: Re: Goodmans GTV42P6 ( BEKO PSU 03 Diagrame / Picture )
Post by: badrick on October 04, 2010,17:00:51

hi all, i offer a repair service for this power supply if anyone need theirs fixing, all work is guaranteed, see my website for more info.
thanks
andy
http://www.andyselectronicstuff.co.uk/index.html (http://www.andyselectronicstuff.co.uk/index.html)