Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: stellaman on February 11, 2010,13:42:26

Title: Philips/Xerox 900W
Post by: stellaman on February 11, 2010,13:42:26

Hi, have 2 of these in at the moment with same symptoms.They power up ,gives a 'no signal' dialog box then goes off/ LED goes out.Inverter volts seem OK. Any help appreciated, Thanks Dave

Title: Re: Philips/Xerox 900W
Post by: JAYROD on February 11, 2010,18:56:12

Is that a monitor or tv dave. I am at the moment viewing this on a XEROX 900P which i repaired about 2 years ago,it had the same fault symptoms. There will probably be some electrolytics need replacing on the psu/inverter board. Get that fancy ESR meter of yours out.

Title: Re: Philips/Xerox 900W
Post by: stellaman on February 12, 2010,05:43:51

Thanks Jayrod will revisit the PS. Found out C10/11/19 can cause problems. :thumbup: