Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: EARLYBIRD on February 18, 2010,09:45:10

Title: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: EARLYBIRD on February 18, 2010,09:45:10

Hi. We have a 18 month old Daewoo DLT-37C3FTB stuck in standby. Red light only turning to green for a split second when the remote is used.Dont thinks its the power supply,any ideas. living in hope of a solution.Thanks

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: sparky on February 19, 2010,05:27:17

hi
try fitting psu kit charles hyde or ohmsupplies stock them
sparky

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: pol-uk on February 19, 2010,07:21:53

Try to put an empty EEPROM to main board, it should be 24C16 I think. Regards

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: EARLYBIRD on February 19, 2010,09:06:21

Hi.We have tried the power supply kit with no luck ,will try eprom if we can find one and let you know .Thanks

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: sinclairtv on February 19, 2010,14:36:19

I just fixed one today, came on with hairdryer on PSU..was the 2 1000/25v caps in PSU though I suppose they are part of PSU kit.

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: EARLYBIRD on February 20, 2010,06:21:30

Hi.Tried u31 eeprom no luck,changed c30,31,34,35,36,37,power supply kit,warmed caps up on power supply no luck .Are the caps you changed top left or top right of the panel. Any more help please.Thanks

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: sparky on February 20, 2010,09:55:43

hi
how about c547 +c548 in kit?

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: sinclairtv on February 20, 2010,15:01:14

Top right of panel..also changed the 2 smaller ones there. Didnt change 470uf cos I didnt have any 35v ones.

Title: Re: DAEWOO DLT-37C3FTB STUCK IN STANDBY
Post by: preytec on January 19, 2014,06:42:41

did yous ever fix this problem?