Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: tomaboy on February 27, 2010,15:23:43
-
Hello!
I'm looking for t-con (lcd controller) board for my philips 32pf3320 lcd tv.
You can see it here http://obrazki.elektroda.net/37_1244459246.jpg (http://obrazki.elektroda.net/37_1244459246.jpg)
Pls inform me if you can help or you know where can I find that. Thanks in advance.
-
I think I've got it the last one. But try to describe fault with this TV. Do you have only black screen with sound and T-CON looks good ??
-
Hi!
Meanwhile one of my friend replaced the only and faulty fuse for zero-ohm resistor on t-con board. The picture is white now and I can see the osd menu and channels foggly. I tried to find error codes by means of service mode and it showed: ERR 0 0 0 0 0... No fault according to SDM even though picture isn't perfect. Maybe I should find some wrong capacitors on t-con or small board that located edge of screen....What do you think?
-
Put a photo we will think about it. Regards
-
Hi,
I have the same problem with an 32PF3320.
The used Panel is a Quanta QL21HD02.
The TV has no picture, audio and backlight are OK
No Videotext and onscreen display or menu.
I also found a bad fuse F1 in the input of the T_CON board.
I replaced it.
There is still the same problem. I found no bad parts yet.
Any idea??
-
Put a photo we will think about it. Regards
You can see the small panel what I mentioned below of page here:
http://monitor.net.ru/forum/philips-32-lc43e-qd32hl02-info-305578.html
Actually I don't know where should I look for additional bad parts if this panel is working well... :wallbash: