Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: litemoth on March 07, 2010,14:52:30
-
Hi all,
I'm trying to repair my mum's TV - It's developed a verical white stripe about 2" from the right hand side of the screen - the menu graphics are confused and lined. The TV picture is washed out and shifted left. picture colour is washed out - backlight seems ok.
I cant seem to find much mention of this board or TV, so I'm a bit lost. I'd be grateful for any pointers.
:wacko:
Mark
-
Put a screen of a fault, we will try to help you. What's name of screen inside ?? Regards
-
Picture shifted left with a dreary picture - as if the number of colours available have been drastically reduced - you can see boundaries to the colour zones
(http://www.locostbuilders.co.uk/upload/Tv1.jpg)
(http://www.locostbuilders.co.uk/upload/Tv3.jpg)
(http://www.locostbuilders.co.uk/upload/Tv2.jpg)
-
Tried removing the IC ...black screen. As before when replaced.
(http://www.locostbuilders.co.uk/upload/Tv4.jpg)
-
Did you try to put an empty memory. I think is a software fault, try to put empty or find proper memory dump. Did you try to make factory reste in SM of TV ?? Regards
-
I'm afraid i dont know how to perform a factory reset. Any tips?
I'll get a blank IC and try swapping it....
-
Try menu and 4725. Look for factory reset, don't change anything else. Regards
-
I'm afraid menu and 4725 didn't bring up the factory reset :pardon:
-
Menu and 4725 will not bring a Factory Reset, this will bring you to Service Menu where can be performed Factory Reset. Regards
-
Sadly i can't read the menus as they are stripey and corrupt!
-
hello, perhaps take a scart output from the tv to another tv and monitor from there