Mulja tv repair portal

Service manuals & datasheets => LCD TV forum => Topic started by: fix2003 on April 17, 2010,06:53:34

Title: lcd tv vistron 37"
Post by: fix2003 on April 17, 2010,06:53:34

internal label markings
PO216758
QFC 139962
Saga Code avtv001523
LCD PANEL CLAA370WF02S.Y
chunghwa claa370wf02
qn0bckpe 008
80535754z

set is dead
psu marked gpac-211424a rev 2.4

any one got a circuit of psu thanks

Title: Re: lcd tv vistron 37"
Post by: Turnip on April 17, 2010,12:57:47

Hi Vince,

Nothing much on Vistron apart from bulgy P/S caps, piccy of P/S might help Quuq folks remember.

Best of luck - Chris.

Title: Re: lcd tv vistron 37"
Post by: ebanks_les on August 01, 2011,14:52:19

Hi There
My name is Les and having similar touble with the same model Vistron
Have researched it quite alot and come across quite a few hints -all point to faulty psu or main signal board

The caps failure on psu is the easier to fix -the signal board failure is a big headache
Like to know if u solved ur prob -if u have  managed to get spare board .
AFIK the psu crops up occasionally but is usually repairable
Would appreciate ur comments or website guidance
Cheers Les

Title: Re: lcd tv vistron 37"
Post by: ProDave on September 17, 2011,17:25:57

I know this is an old thread, but are you still trying to fix this set?

I have a complete set of panels from a 32" Vistron set, including a good power supply board GPAC-211424a rev 2.1

If you still want this PSU or any other boards, send me a PM.

I don't know if the other boards are the same in the 32" and 37" sets, but might be worth comparing numbers to see.

My panels were removed from a set that worked until the owner smashed the screen.

Title: Re: lcd tv vistron 37"
Post by: Turnip on September 20, 2011,13:07:39

Hi Dave,

If you haven't sold that P/S - any chance of a picture, or even pics with panel numbers - Chris
 

Title: Re: lcd tv vistron 37"
Post by: ProDave on October 31, 2011,10:27:26

Quote from: Turnip on September 20, 2011,13:07:39

Hi Dave,

If you haven't sold that P/S - any chance of a picture, or even pics with panel numbers - Chris
 

Sorry the PSU has sold. About all I have left now is the inverter.