Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: mzone on May 07, 2010,04:02:42
-
i have a lg 42px5d set suffers from a very dim washed out picture.
After further investigation, I have determined that unplugging the X-Sustain Main board did not change the picture quality. This leads me to believe that the X-Sustain Main board may be a fault.
My question is, would I also need to replace the Y-Sustain Main board or the Main Logic board? Unplugging the Y-Sustain board gives me a totally black picture, which leads me to believe that the Y-Sustain board is working, and that the X-Sustain board is the culprit.
My next issue, is it the X-Sustain board that is dead, or the Main Logic board is not feeding a signal to the X-Sustain board.
What would cause a very dark picture on a plasma screen?.
thankyou
-
if i remember wrightly.
it would be the xsus at fault but it best to replace both x and y together
is there a blown fuse on any of the boards?
bloddy LG's
-
Hi,
Had something similar where Z-Sus fuses had blown. Replaced those and sparks from under large heatsink ensued. Replaced Z-sus board - OK.
Must admit that athough Plasma is a problem, there's more LG at the local tips than other makes, but there again, they were used in many cheapy sets - Chris
-
Bleach is usually applied to the laundry a few moments after the wash cycle begins. ... SquareTrade AP6.0 EZ COPY Remote for LG LCD 50 42px5d PX5D-UB 42PX4D NEW AND ... set the minimum/maximum volume, lock out the control panel/remote, ... This listing is for the remote in the picture.It is compatible with most or ...
Hyundai Santa Fe Parts (http://www.carpartswarehouse.com/carmodels/CP7/Hyundai/Santa_Fe.html)