Mulja tv repair portal

Equipment Repairs => DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder => Topic started by: brainstorm on June 12, 2010,10:19:19

Title: Pioneer VSX-C100-S
Post by: brainstorm on June 12, 2010,10:19:19

Hi,
Can anyone help with a schematic diagram for a pioneer VSX-C100-S

It appears to be gonig into protection, it clicks on switch on and there is nothing else

Many thanks in advance

Brian

Title: Re: Pioneer VSX-C100-S
Post by: lubos55 on June 12, 2010,11:37:19

Quote from: brainstorm on June 12, 2010,10:19:19

Hi,
Can anyone help with a schematic diagram for a pioneer VSX-C100-S

It appears to be gonig into protection, it clicks on switch on and there is nothing else

Many thanks in advance

Brian

Hi ,

manual is here.

Title: Re: Pioneer VSX-C100-S
Post by: brainstorm on June 12, 2010,12:00:33

Thanks Lubos you are a Top man! :clap:

Regards
Brian

Title: Re: Pioneer VSX-C100-S
Post by: lubos55 on June 12, 2010,12:48:54

Quote from: brainstorm on June 12, 2010,12:00:33

Thanks Lubos you are a Top man! :clap:

Regards
Brian

Not at all  :pardon:

Title: Re: Pioneer VSX-C100-S
Post by: brainstorm on June 26, 2010,05:45:53

Hi

The power Transformer(T1) had a open circuit primary winding.
The part number from the manual is ATS7336
I can't seem to find a supplier, does anyone know who supplies Pioneer spares?
it used to be SEME but they seem to have drifted out of our trade

Many thanks in advance

Brian

Title: Re: Pioneer VSX-C100-S
Post by: Turnip on June 30, 2010,13:14:59

Hi Brian,
 Buried thermal fuses can be a prob - just a thought  - Chris.

Title: Re: Pioneer VSX-C100-S
Post by: brainstorm on July 01, 2010,04:30:37

Hi Chris,

I did a special enquiry via Seme and the Transformer is no longer available( it was £57 +vat trade, ridiculous price!)

The customer has scrapped it. They probably wont be buying Pioneer again and I dont blame them

You are probably right and there wil be a thermal fuse buried in the windings, but if you start digging then you might find yourself in a hole regarding "Elf and safety" So I will steer clear

Thanks anyway
Brian

Title: Re: Pioneer VSX-C100-S
Post by: Turnip on July 07, 2010,12:31:34

Hi Brian,

Confess, have done fuse and EHT rectifier drilling since stuff was first buried in the 70's.

Coughing a bit from engineering but not smoking - Chris.

Title: Re: Pioneer VSX-C100-S
Post by: WILLYAM1 on July 08, 2010,08:08:43

hi brainstorm.
try to repair your transfomer in a place that repair MOTORS... WINDING?.
IT CHEEPER AND SAFE.
WILLYAM1

Title: Re: Pioneer VSX-C100-S
Post by: Turnip on July 09, 2010,12:28:40

Hi Brian,

Confess have been doing non-clipboard repair stuff since before clipboards were invented, well, just to eat, drink and smoke, and do other stuff wot young folks do.

Trouble is, grandchildren eventually accumulate, and they aren't always nice  - Chris.