Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: sparky on June 27, 2010,13:13:01
-
hi
the above tv no anolgue or digital got original remote it
works goes thro anologue tuning no channels found cannot get digital menu
also will not work thro scarts any ideas
thanks dave
-
HI SPARKy, Mr euras says eeprom might need reprograming-IC303.
Service mode,4725 if it's a 17MB24. That's only info I could find for that area of fault.
Might be worth a go.
John.
-
hi
john thanks for that the chassis 17mb24h-3,
switched tv on blue screen pressed menu
entered 4725 then blank raster do now if you
can get the eeprom pre-proggramed
thanks
dave
-
hi
another one for pile
dave
-
hi dave
this is the closest one in my database 17mb24h-2,
but it has no freeview, might be able to activate if an option in service menu,
or at least get analogue working
good luck
daz
-
hi
thanks but cannot get into service menu screen
just blanks out
dave