Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: blackmail on July 08, 2010,08:41:06
-
Fault all voltage on the psu ok inductor ok, when i switch it on the tv displays full red/green/blue
on with an interval of about 3-4 seconds
no osdno function from push button
-
this is a common problem on vestel chassis, the set is in burn in mode, pressing menu on the remote should cancel it until the next time the set is turned off/on. go into service menu and turn burn in mode off.
if its not a vestel then would say changing the eeprom should correct problem.
good luck
daz
-
I tried this and the remote turns the tv on and off, but when i press menu nothing happens
-
I have tried blanking the eprom but it gives me the same result
-
Hi BM,
But is it Vestel - we are all gagging - well, some of us, a bit - Chris.
-
take a pic of the inards,might help
daz
-
thanks for your help here are the pictures of the innard
http://www.digitalworldz.co.uk/uploads/posts/2/0/5/3/0/52973.thumb?d=1278604279
http://www.digitalworldz.co.uk/uploads/posts/2/0/5/3/0/52974.thumb?d=1278604286
http://www.digitalworldz.co.uk/uploads/posts/2/0/5/3/0/52975.thumb?d=1278604299
-
Hi BM,
Pics were a bit short in definition and might be almost anything.
How about pics of your telly ? - Chris.
-
hiya had similar problem on a grundig --turned out to be one of control buttons on tv leaky replace cured it
may be worth checking
good luck
astracat
-
the tv is acoustic solution 32 main av board
-
anyone got any idea what to do with this set
-
Hi,
Take some real piccies and send them in - Chris.