Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: mzone on July 17, 2010,03:23:31
-
hi.
i have a Philips 42pf7320. set shuts down after about 10 seconds.
on the power board there is a small alarm signal board with the error codes 1-13 printed on pcb when the tv shuts down theres a small smd led which flashes 8 times on the small alarm signal board this shows on the alarm signal board as a VE error.
anyone help
-
Hi mzone
Might be worth warming the psu electrolytics with a hairdrier before switch on. Had a similar problem on a Philips plasma (albeit not the same model) caused by a duff capacitor. Located it by this method.
Best of Luck
John.
-
Hi,
Notice this Philips seems to be Samsung - previous Quuq thread - Chris.
-
thanks Contrast John i have ordered some new caps so will give that a try.
-
Hi mzone, I have exactly the same model and same fault (8 flashes). Have you fixed yours? can you remember which caps you changed? I have already done C8059,C8060 :03:
-
Hi,
Have some info on this Philips(Samsung) set - good luck - Chris.