Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: JAYROD on August 14, 2010,18:04:52

Title: BUSH IDLCD26TV07HD ,NO PICTURE
Post by: JAYROD on August 14, 2010,18:04:52

The fault on this lcd tv is,no picture when first switched on,sound is present.As tv warms up faint horizontal lines start to appear and eventually after about 30 mins a good picture will appear. I think that the T,CON board may be faulty. Any other ideas?

  Thanks, phil.

Title: Re: BUSH IDLCD26TV07HD ,NO PICTURE
Post by: Turnip on August 15, 2010,13:53:54

Hi Phil,

Gather this is a Beko - nothing listed here but some 26 inch sets are renown for screen probs. Try a little heat, vibration and screen twisting to see if anything shows up.

Out of interest, what's the T'con board.

All the best - Chris.

Title: Re: BUSH IDLCD26TV07HD ,NO PICTURE
Post by: JAYROD on August 17, 2010,07:30:40

Hi chris, here is a photo of board and on screen fault after tv has been on for about 10 mins.


   phil.

Title: Re: BUSH IDLCD26TV07HD ,NO PICTURE
Post by: Turnip on August 18, 2010,12:56:09

Hi Phil,

Nice pic, bet you'll get some feedback from knowing folks - Chris.

Title: Re: BUSH IDLCD26TV07HD ,NO PICTURE
Post by: sparky on August 18, 2010,13:03:59

hi
think turnips right screen prob gone have you tried connecting scart out
of you tv to another if you get a good pic 9out10 screens caput
dave