Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on August 17, 2010,07:16:22
-
hello everyone.
main power on no stby LED(USALLY LES IS BLUE).
found in p.s capi 15n/630v i repleced new capi steel same problem .
stby5v is ok 3.3v stby is ok no other valltge 24v 12v 33 v 5v all missing.
any adia ? which pin is on/off any schematic diagram for17pw 15-9.
willyam1
-
hi .
stby pin(6) plag pl803 in p.s is always 1.7v no change by remot or butons.
when shorting this pin yo gnd(0)can get all voltags 24 12 5 3.3 33 but steel no screen no stby led .
think main board is not working maybe micro or memory any adia?.
willyam1
-
hi .
stby pin(6) plag pl803 in p.s is always 1.7v no change by remot or butons.
when shorting this pin yo gnd(0)can get all voltags 24 12 5 3.3 33 but steel no screen no stby led .
think main board is not working maybe micro or memory any adia?.
willyam1
Hi,
try re-programing eeprom by this file .
-
thanks lubos55.
have to buy programer.
willyam1
-
thanks lubos55.
have to buy programer.
willyam1
For this time you can use programer as ponyprog.....etc
-
thanks lubos55.
i found some topics thut hade same problem problem in processor iwill try to get a new mian board..
it hard to get one in my country the service company won'tsell it.
hope to be better (some conection0.
willyam1