Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: daddymayhem on August 18, 2010,17:07:46

Title: fsp312-2m01 burnt pins at cn2a- inverter feed
Post by: daddymayhem on August 18, 2010,17:07:46

hi guys first post so be gentle, got an onn a42zid tv that wont power on, when checked the cable that goes to the inverter is burnt and melted at pins7-10.dont want to buy new power supply in case its the inverter thats the prob, any ideas, also from the diagram it looks like cn2 can be used as a subsitute is this the case, thanks

Title: Re: fsp312-2m01 burnt pins at cn2a- inverter feed
Post by: Turnip on August 20, 2010,12:11:32

Hi D/M,

Don't have your Onn listed, so how's about some piccies. Note you have a diagram of some sort, would you care to share it with us ?

Thanks - Chris.

Title: Re: fsp312-2m01 burnt pins at cn2a- inverter feed
Post by: daddymayhem on September 05, 2010,11:38:52

heres the info i've got, tried soldering the cable directly to the psu but no difference, now need a psu and a cable for the inverter can anyone help

Title: Re: fsp312-2m01 burnt pins at cn2a- inverter feed
Post by: Turnip on September 05, 2010,12:35:32

Hi DMH,

Found some more stuff - not had one meself but.

Might be useful - Chris

Title: Re: fsp312-2m01 burnt pins at cn2a- inverter feed
Post by: welshblob on September 05, 2010,13:28:19

Quote from: Turnip on September 05, 2010,12:35:32

Found some more stuff - not had one meself but.

Thats my post :13: Finally got the replacement power supply last weekend but haven't had a chance to fit it yet. I hope its ok and doesn't burn out like the other one, will post the results! In the meantime just fixed my first Samsung which is very satisfying.
Cheers Rob