Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Turnip on August 20, 2010,13:17:02

Title: DM Tech LT17XTS - DVD.
Post by: Turnip on August 20, 2010,13:17:02

Hi folks,

This one seems rather fun as the DVD mech fitted is of the horizontal variety but it is fitted vertically so the disc falls out as nothing secures it.

If disc is loaded horizontally, it says 'No Disc' even with a CD.

This might just be a failed guarantee repair - anyone seen the like  ? -- Chris.

Title: Re: DM Tech LT17XTS - DVD.
Post by: astracat on August 20, 2010,15:52:33

hi turnip
had one of these where disk load spring had fallen off,also had one with faulty disk motor intermitant try spinning disk by hand for latter test
g/luck
astracat

Title: Re: DM Tech LT17XTS - DVD.
Post by: Turnip on August 23, 2010,11:40:03

Hi Astro - and thanks,

Confess that I tried loading disc after taking set apart to photograph. Discovered after a quick lens clean then re-fitting the stand that set leaned back by a few degrees, and disc didn't fall out - and the DVD played.

More used to modern Flat screen DVDs that grab the disc at any angle then fail to play it.

No other observations, jest grateful  - Chris.