Mulja tv repair portal

Equipment Repairs => DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder => Topic started by: Turnip on August 21, 2010,06:04:36

Title: Panasonic DMR-EZ25 U01 displayed
Post by: Turnip on August 21, 2010,06:04:36

Hi folks,

Have one of these FTV DVD recorders displaying U01 after the usual 'please wait' bit. Tried holding down Ch up and stop in S/by - DVD opened empty after some seconds. Tried then holding down those plus eject - machine came on and displayed U01.

Any thoughts ? - Chris.

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: sparky on August 21, 2010,07:21:09

hi
chris prob ram unit
dave

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: brainstorm on August 21, 2010,08:48:46

Hi Chris,

Are you sure it's U01 ??

Ive never heard of that code and ive repaired a lot of these babies!

If you have another look i bet its U81(should have gone to specsavers)


Brian

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: Turnip on August 22, 2010,13:54:29

Hi, and thanks Brian.

Will check that error number when boss man gives me my journeyman tablet.

Searching fer his specs - Chris.

Found his pince-nez so attach piccy of this well-cool baby in fault mode - looks like U01 to me but - So what's U81 (Guess no specs)

PS - Hi Dave, read that in one of 'Brainies' earlier epistles, guess he puts the 'P' into Anasonic for us Quuq folks.

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: brainstorm on August 24, 2010,06:21:52

Hi Chris,

The pic is a bit shaky(you need to put more water in your drinks!) so could be U81.

I have had C1533 680uf 6.3v causing no dvb, so could trigger U81 worth a look, they usually bulge.

I will send you a really nice guide to help you in case that doesnt work!

Brian

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: Turnip on August 24, 2010,12:55:52

Gee, and thanks Bri,

Always press me own apples for our Norfolk cider - no other water employed apart from bathing.

As to your C1533 - most impressed, got me back me FTV tuning, and made a pound - don't tell Sparky - or he'll want one too, though as a Midlander even more  - Chris.

PS - Thought to mention that I found C1530 (100/25) bulgy, so replaced it. Made no difference of course but it's on the same buck convertor as C1533, which in this case was fine.

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: stellaman on August 25, 2010,10:49:28

chris also could it be U61 which may need a system reset.
1.Shut down appliance....bye displayed
2.press STOP/CH+ and OPEN/CLOSE on front panel.....hello displayed TM AV1 displayed
3. Power off appliance...11-11 then 12-12 displayed
4. Unplug and power up .....22-22 displayed
5. retune

Dave
PS did you get my email re Sanyo?

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: Turnip on August 25, 2010,12:01:31

Hi Dave and thanks.

Changed the Sanyo caps and all seems well. Guy I was about to buy a stand from has same problem so when I tell him about the caps guess he'll keep it.

It's an ill wind that blows no-one any good - or somesuch - Chris.

PS - As to the Bush mainboard - no use to me with a duff power board, so - my pleasure.
PPS - U81 seems to be a known freeview board problem - anyone got a spare one  ?

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: Turnip on September 28, 2010,12:57:55

Hi Matthewop,

Ever tougher - usually Tog 5 for winter nips - Chris

Title: Panasonic DMR EZ25 U01 displayed
Post by: Abammanvand on November 12, 2010,01:57:55

Will they address of the issue of being able to play what you recorded on this unit on Blu-Ray with other non Panasonic Blu-Ray players?  Will it also have Digital inputs?
_________________
http://www.ps2netdrivers.net/manual/sony.rdr-hxd970/

Title: Re: Panasonic DMR-EZ25 U01 displayed
Post by: Turnip on November 27, 2010,13:17:19

Yes, Ab,

But it don't go, no-how, even with rays longer than red - Chris.