Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: sparky on August 27, 2010,09:35:25
-
hi chris
i d'nt suppose you have service menu for setting width/e/w and height
cust says kids been playing with remote,
trying to earn a grot or two
dave
-
hi sparky
the eeprom is a common problem on this tv,you will probably have to replace it.chs will do you one. but if you have a blank one and a programmer hear is the program attached.
think smenu is sby-display-menu-mute-sby
-
hi daz
thanks for info tried opening attachment nothing comes thro
dave
-
hi sparky
for some reason you will have to start pony prog first, then use the open tab to load it in , carnt drag and drop this file for some reason?
let me know if still having probs
daz
-
hi daz
tried no luck
dave
-
very strange :dubbio: it works when i dowloaded it?
try in this exact order (its what i did)
click on attachment and save it to your desktop
start pony prog
click on file
then open
then desktop on the drop down menu
then double click on file
im at a loss if it still dosnt work
perhaps diferent ver of ponyprog?
mine is ver 1.17h
good luck
daz
-
hi
cannot find pony prog on laptop
dave
-
download from this site
http://www.lancos.com/ppwin95.html
-
hi
its a serial device program to reset chip
dave
-
Hi Sparky, took me so long to realise who made it - well WS might be Bush or most anyone.
Haven't yet got to Eeprom stuff - all that Bolean Algebra get's my Norfolk Turkeys gobbleless.
Counting base 16 also gets me worried.
PS - There is a track (attached) that might give godless Quuq mathless folks a giggle - Chris.
-
hi dave
you must have one of those new fangled computers with no parallel port.
email me your address and ill send you an eeprom, think its a 24c16, if you could check
daz