Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on September 02, 2010,01:47:17

Title: HAIER 26LR1
Post by: WILLYAM1 on September 02, 2010,01:47:17

hi to all .
this tv works fine and after about 20 -30 min screen become white.
by power off and on again screen is ok for another 20 min.
ther is no tcon or lvds board a flat cabel from main board to scrren .
any aidia????.
willyam1

Title: Re: HAIER 26LR1
Post by: Turnip on September 03, 2010,12:53:50

Hi W/1,

Don't have it listed, and never met a LCD without a screen drive - yet.

Give us pictures - Chris.

Title: Re: HAIER 26LR1
Post by: Contrast John on September 03, 2010,13:09:33

Hi Guys
Sounds like the screen may be faulty. When the fault is present try holding the top corners of the television and giving it a twist. If the fault clears then most likely the screen is faulty.
Regards
John.

Title: Re: HAIER 26LR1
Post by: WILLYAM1 on September 03, 2010,15:18:27

thanks turnip and contrast jhon.
I pulled out LVDS CABELput it back and power on tv is workink ok about 8 hour ok .
dont know why but its workink.
willyam1