Mulja tv repair portal
Service manuals & datasheets => LCD TV forum => Topic started by: yellowpinky on September 03, 2010,03:33:11
-
Hello Group,
This set is dead with no led lite.
There is voltage on the primary side of the power supply but nothing on the secondary.
Has anyone a circuit for the power supply and the 5v start up supply.
The power supply is a BN96-03775A and not the one with the 1000uf bulging caps.
Many thanks Ian Harrison (Sound and Vision)
-
hi ian
had lots of problems with icm801s - F9222L, might be worth a look , chs will do you one.
good luck daz
-
Hi folks, have nothing listed - bit embarassed -
Well folks don't always say - not all Tories these days, I guess,
Guess you'll attach loads of piccies, perhaps - Chris.
-
:brinda:
-
Hello All,
I have been away for a few days and just picked up your comments.
I did suspect F9222L, but I did not know where the missing start up supply came from.
I have printed off the circuit and should pinpoint it tomorrow.
I will keep you posted.
Photo attached.
Many thanks to Daz, Turpin and Vladimir H
-
Hello group,
Thanks for the circuit from Vladimir H.
DS 851 (SB560) s/c.
Working well and a happy customer.
Best regards Ian Harrison (Sound and Vision)