Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: WILLYAM1 on September 22, 2010,16:11:02

Title: plasman enop 42v7
Post by: WILLYAM1 on September 22, 2010,16:11:02

HI to all.
sound ok dead screen with few spots.
after changing plasma kit(3 boards y+z+c)picture is very good accept a very thin line from up to bottom scrren in left corner of the screen.
is it a panel problem or x left board.
ant one hadesame problem.
atache phto.
willyam1

Title: Re: plasman enop 42v7
Post by: ozzietech on September 22, 2010,17:18:50

Could be panel, but clean the flexi under the line and check any check any OC or dry joint resistors on flex.

Title: Re: plasman enop 42v7
Post by: WILLYAM1 on September 24, 2010,15:13:39

thanks ozzieteck.
all ready made all this checks( oc  cof cleaning dust  )    somthing else ? anyone?.
willyam1