Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: davenjax on September 24, 2010,07:36:50
-
hi all i have this tv all i get is the blue led operation light other than that nothing else no sound no picture and all buttons including power are non responsive any suggestions would be greatly appreciated cheers .dave
-
Do you need service manual ?
chassis jl2.1,
is not error on the led, no flashing?
sound is ok?
-
hi there thankyou for the reply there is no life at all no sound no pic and no error code just a constant blue led and no response to any function do you have a manual available for download ? thanks
-
i don t know upload file,
service manual is to big(75mb)
:dubbio:
-
hi
have you tried remote to turn tv on?
just in case cust has put child lock
on,also it might be ssb panel
dave
-
hey the simple things sometimes elude us i never thought about the child lock nice one sparky will give that a try first although will have to source a remote as it didnt come with one but great suggestions cheers sparky
-
saying that though it doesnt come on in standby in cuts straight to operate ???? when you refer to the ssb panel ? i may know it under a different reference where is it located rgds dave
-
just thought is it the secondary supply board ?
-
hi
the ssb board is the main signal panel were the microprosser is
could be expensive i will try and find a pic of ssb panel
dave
-
sorry sparky just read your reply thanks for puttin me in the right direction would really like to get this tv fired up rgds dave
-
Hi,
Might this be another Philips A10' ish prob where cure costs more than replacement, and Philips cares no more than for a small monkey ?
Love Philips - but not much, after all those bowden cables in the 50's - and much else since - Jest don't ask - Former Philips group employee
Name withheld - for reasons - Chris.
-
hi
check price charles hyde but sit down first
dave
-
aaaaaagh it breaks the heart .such a good looking tv too . stooopid philips
-
holy mother of god 481.00 for an ssb board over 1000.00 for a replacement lcd ??????????? dont suppose anyone has somethin a bit cheaper ? ssb wise
-
hi
try going to philips direct and complain saying the
ssb board should last longer sometimes they will
do it under guarantee ,if it becomes a stock fault
dave
-
cheers sparky will give it a go iv nothin to lose and everything to gain hopefull .rgds dave
-
Hi,
it could also be an inverter fault;if it is the case replace both master&slave boards.Cheers.
-
Hi,
Otherwise - just hang about a bit as one is sure to turn up in a screen smash spare on Ebay, or try Quuq 'spares to buy' every few months - find it pretty good meself - Chris.