Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: eddolls on September 29, 2010,11:34:14
-
Hello people,
I am repairing a Goodmans LD3260HDFVT with a 17mb15e-7 AV board. The problem is that the screen is black but the back light is working and power supply voltages are ok.
I have heard that there is a common fault on these boards for the eeprom to corrupt . I have searched the internet hi and lo including the downloadable s on this site, I have also phoned vestal direct to try and get old of this file with no joy.
Does any one know where I can get hold of said file??
Regards
Chris
-
Hi Chris,
Have something similar meself where a jolly Vestel screen displays weak bright piccies.
Just to be empathetic - Chris.
-
Do you have sound from the speaker. If yes,
check the fuse on the lcd controller board.
They seems to be very weak, and could break without any reason.
-
ok Kilroys i will give that a go and post my results
-
Hi guys, sorry for the delay,
As kilroys said I checked the fuses on the lcd control board and they were gone. Replaced them and the tv fired up fine.
Thanks again
Chris
-
Hi Chris,
Congrats, and what screen drive fuses were the prob ?
Well, folks will ask, and they will want good piccies too - guess you will supply.
Never win, even with a decent camera with megawhatsits - Chris