Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: digitech1962 on October 02, 2010,07:23:31

Title: Bush idlcd26tv22hd/vestel
Post by: digitech1962 on October 02, 2010,07:23:31



Dead no standby light on psu is 17pw15.9 no fuse blown bridge ok    cust on a budget so would
like to fix  thanks









Title: Re: Bush idlcd26tv22hd/vestel
Post by: davenjax on October 02, 2010,11:20:44
i may have a power supply from a sanyo/vestel 25.00 if thats any help ?
Title: Re: Bush idlcd26tv22hd/vestel
Post by: chrissie jones on October 02, 2010,11:31:20
im not sure but i think a 17PW.15.8 will go in.if so iv'e got one £15+ make sure first.
Title: Re: Bush idlcd26tv22hd/vestel
Post by: digitech1962 on October 04, 2010,06:35:26
hi thanks lads 15.8 wont do 15pw20.1 or v1 v2

Sorry I made a typing error the message should be

17PW20.1 OR V1 V2
Title: Re: Bush idlcd26tv22hd/vestel
Post by: chrissie jones on October 04, 2010,06:45:51
i will see if i have one.
Title: Re: Bush idlcd26tv22hd/vestel
Post by: davenjax on October 04, 2010,08:03:08
hi sorry i only have 17pw psu's will the kit from chs not help ?
Title: Re: Bush idlcd26tv22hd/vestel
Post by: Turnip on October 04, 2010,11:22:14
Hi,

If you fancy digging around a bit, have some stuff on file - Chris.
Title: Re: Bush idlcd26tv22hd/vestel
Post by: chrissie jones on October 05, 2010,02:34:26
good thinking batman. :iagree: