Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: astracat on October 15, 2010,11:11:45

Title: goodmans ld2650hd
Post by: astracat on October 15, 2010,11:11:45

hi all req code for service menu .fault is no digital &wont store analogue
would like to try reset first before diving into this set
thanx for looking
astracat

Title: Re: goodmans ld2650hd
Post by: Turnip on October 15, 2010,11:37:30

Hi A'cat,

Note it's a Vestel - lots of info on Quuq - Chris.

Title: Re: goodmans ld2650hd
Post by: astracat on October 16, 2010,14:56:02

hi,turnip
have tried vestel code but still cannot get into s/mode,can only get menu up by pressing dig/tv button
but nothing happens when code number inputted,will have to try software update if can find it
any way thanx for info,will post cure when done
astracat

Title: Re: goodmans ld2650hd
Post by: Turnip on October 17, 2010,11:22:56

Hi A/C,

Bit embarrassed as have checked again and found it might be  'Profilo Telra' -  for my many sins, and all I have is 'Check C330' as have no note on particular PS involved - lots on PF power supply stuff generally.

Piccy would have helped - tell Sparky - Chris.

Title: Re: goodmans ld2650hd
Post by: lil paul on October 19, 2010,12:44:06

im using the Goodmans LD3255HD
it may work 4 ya astracat.

reset
by pressing up/down button select reset press <  >  or ok button to reset the pic modes to default settings.

or any thing on the book list?

Title: Re: goodmans ld2650hd
Post by: astracat on October 20, 2010,09:16:02

hi thanx for the info
have tried vestel&profilo codes but still cant get service mode ,can tune analogue manualy but no digital menu
does anyone have firmware?,can always change eprom to see if it will load software automaticaly
if not probably be dismantled for spares
astracat