Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: davenjax on October 16, 2010,12:03:00

Title: bush lcd26tv006hdx flashing standby light 04ta0691 psu
Post by: davenjax on October 16, 2010,12:03:00

hi everyone .had this tv come in .symptoms were stuck in standby with just a flashing standby led .found bulging cap c330 1000uf located under heat sync but just replaced the whole kit which is available from ohm for 24.00 posted tv is now restored to full order and attached is a pic of the psu for your reference.dave

Title: Re: bush lcd26tv006hdx flashing standby light 04ta0691 psu
Post by: Turnip on October 16, 2010,12:46:56

Hi D/J,

Think to attach a Profilo file, have suffered, muchly - Chris

Title: Re: bush lcd26tv006hdx flashing standby light 04ta0691 psu
Post by: davenjax on October 16, 2010,16:07:54

hi chris i didnt have a file on this occasion just went straight for the throat this time

Title: Re: bush lcd26tv006hdx flashing standby light 04ta0691 psu
Post by: Turnip on October 17, 2010,12:03:47

Hi D/J

Note that some caps fitted in C330 position last at least a month due to excess ripple probs - seems that Wilts now do one low ESR cap suitable, and ChasHyde, several.

Notice also that most upgrade/repair kits have sort'a disappeared from sight with perhaps a puff of something most curious.

Ever hopeful - Chris.

Title: Re: bush lcd26tv006hdx flashing standby light 04ta0691 psu
Post by: davenjax on October 17, 2010,13:10:56

i hear you will be on test vigorously trust me will not buy another of these though bad build quality .rgds dave