Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: daddymayhem on November 01, 2010,11:37:03
-
cant seem to find any suppliers on the net, or is there a site that will show me how to make one as the cable is not one to one and has burnt out, thanks
-
Hi D/M/H,
You could always hard-wire, most power to invertor leads tend to quad or quintruplicate 24v and main neg feeds to prevent those crap plugs/sockets burning out - still do though.
You probably only need 4/5 cables, with a couple capable of 5 ish amps and soldered directly.
Just a thought - Chris.
-
thats what i thought-prob being cable at psu is 10 way and at inverter its 12 way and cable is burnt out so would need pin-outs-got them for psu but need them for inverter, psu is fsp312 inverter is ssi400wa16brev7-anyone got pinouts for this
-
Hi,
Failing that, just check print under power and Invertor boards plug/sockets for parellel connections - wire is still cheap'ish - Chris.