Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on November 14, 2010,13:50:59

Title: pilot-pil32va
Post by: WILLYAM1 on November 14, 2010,13:50:59

HIeveryone.
problem is no stby led just a noise in back of tv.
p.s is mlt666-a lot of capi is bulging were change now tv is in stby led red is on but no operetion by remote or front button.
pin stby always 0v .
when a new p.s is  in the tv tv is on there is backlight but no data no osd no pic.remot can power off  the tv but cant operet again tv stuck in stby to operet again main power must shut down.
 smd fuse in tcon board is ok.
main board is B.TRTDSA  6233.ALL VOLLTAGE ARE OK 5V 3.3 2.5 1.8 12 AND 24
panel is V320B1-L01.
is it AN EEPROP OR MICRO OR .........??????.
need help.
 willyam1

Title: Re: pilot-pil32va
Post by: abou jaafar on November 14, 2010,16:26:29

if the power baord is ok , you have to make a new software for lcd..

Title: Re: pilot-pil32va
Post by: WILLYAM1 on November 15, 2010,01:16:59

thanks abou jafar.
were can i get a new software?.
willyam1