Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: markm on November 20, 2010,11:53:13

Title: Bush IDLCD26TV16HD
Post by: markm on November 20, 2010,11:53:13

Hi,
Just been given this tv with no sound or picture, bin it i hear you say !! when you plug it in to the power supply it makes a crackling noise from the PSU area.
Just wondered if there is a simple fix or a trip to the dump ??

many thanks in advance

Mark

Title: Re: Bush IDLCD26TV16HD
Post by: davenjax on November 20, 2010,12:52:45

hi mate generaly there is a repair kit available you just need to identify the power supply model number on the board and look for a repair kit online .i use chs or ohm supplies all you need to be able to do usualy is solder but if your not confident dont do it ie dangerous voltages etc

Title: Re: Bush IDLCD26TV16HD
Post by: Turnip on November 20, 2010,12:59:33

Hi D/J,

Had one, attach my sad thoughts - nifty solderer though, even with pure tin - poop -   Chris

Title: Re: Bush IDLCD26TV16HD
Post by: davenjax on November 20, 2010,14:21:56

hi chris if memory serves is that the psu with the 2 x35v 1000uf caps in the center usualy bulging out the top ?

Title: Re: Bush IDLCD26TV16HD
Post by: Turnip on November 22, 2010,12:53:18

Hi Davenjax,

Not mine - it were perfect, but didn't go - chopped it up and sent to Brum and Cornwall - hope they don't take up against God's Turkey County - Chris.