Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: daddymayhem on December 14, 2010,16:44:30

Title: baird LC-37W18S screen goes red then orange then blue then etc
Post by: daddymayhem on December 14, 2010,16:44:30

this set was working perfect until i sold  it, guy comes back next day with this fault. it just scrolls through sokid screens and when it does this the top button bar dont work, after re-seatig lvds cable it gices a herring bone display, any ideas guys

Title: Re: baird LC-37W18S screen goes red then orange then blue then etc
Post by: Turnip on December 15, 2010,13:10:11

Hi DMH,

Have a Sammy feeling about this one, as Baird has done now't since I were a lad - Chris.

Title: Re: baird LC-37W18S screen goes red then orange then blue then etc
Post by: daddymayhem on December 15, 2010,16:56:10

no good at cryptic, set appears to have 2 modules plug in modules and no mainboard, does the lvds seem to be the culprit

Title: Re: baird LC-37W18S screen goes red then orange then blue then etc
Post by: praba341 on December 15, 2010,23:10:48

replace eprom :08:

Title: Re: baird LC-37W18S screen goes red then orange then blue then etc
Post by: daddymayhem on December 16, 2010,01:50:10

if i replace with a blank eeprom will it write it-i tried to get into service mode by the method in user manual but it didnt work-does anyone know location of eeprom in this set as it doesent seem to have a mainboard just two enclosed modules

Title: Re: baird LC-37W18S screen goes red then orange then blue then etc
Post by: Turnip on December 16, 2010,12:05:32

Hi D-M-H,
Not trying to be cryptic, but don't yet know who made the set - Eeprom piccy was poor and manual was shy of a makers name.

Ah well -  must be 'Democratic state'  produce  - Chris.