Mulja tv repair portal
Spares => Spares to buy => Topic started by: dougc on January 07, 2011,10:56:30
-
Hi, Has anyone got a bush psu for sale? Number;04ta0691
-
Hi Dougc,
That pic is full of bulgy caps - think I have one kicking about from a screen smash - Chris.
-
Hi Chris, I know the caps are bulgy but it also needs a kit & i'm not sure about the 5v tx. Can we negotiate a price for yours? Doug.
-
change the caps,you mite be lucky.
-
Hi Dougc,
Never yet had a duff tranny after that s/by chip pop - anyway - dead easy to check. Will check my (several x 10 to-the-thing) loft boxes of LCD/Plasma bits tomorrow - need a workable system - or a new life, full of decent profitable greeness - still lots of uneaten leeks about, gardenwise - Don't tell C/J -
He'll invade Norfolk with chum Charles and those modern Welsh Rap tunes - pillage and wrap stuff that our local turkeys now find tedious since 'The Man in the tweeds' is gone - Some broad locals hope those 'Pearly Gates' don't have Turkeys/Rampant - others - the slim workers - don't care quite so much - shame.
Have great friends in low places - Chris.
-
hi
ohmsupplies sell the transformers if yours gone
try kit first if transformer measures ok i had one
were transformerwas o/c checked thro old panels
found line drive transformer same readings fitted
cured fault took some finding in old panels
dave
-
hi just wanted to wish you the best of luck with this one .i repaired one of these with a kit worked for three weeks failed again same fault not a pleased chappy .hope you have better results than me .dave
-
i must say i hav'nt had a bad one yet.YET!!!!!!
-
Thanks for all your input. I suppose i was being a bit lazy looking for a replacement panel. I'll order a kit & change caps & see how it goes, Doug.
-
your not the only one doug.we all try to look for an easy way out.
-
Hi C/J,
Got a couple of nasties you could have a look at - Davenjax, you never said if it were them cheap caps, and we're still holding our breath hoping no customer ever mentions the word 'Refund'
Worst word in our trade, I guess - after Profilo(this week) - Chris.
-
hey chris i used panasonic 105 degree caps they should be ok never had an issue with them guess its just the profilio curse ... never got paid in the end anyway .dave
-
hi
the panasonic caps seem better than others
we all sometimes work for nothing
dave
-
Hi Davenjax,
Guess you're right - remember all those millions of Panasonic caps we replaced in Panasonic videos and made a pound (well more like £30 a hit, at least 4 a day, with belts/tyres from our chum JJ to fix the rest apart from Fisher, No-one could fix one for more than a week)
Could afford to smoke in those days - esp. after a Fisher
Have a couple of troublesome Profilo power supplies Sparky, if you're keen on working for now't - Chris.
-
ah remember the days well chris loved the philips turbo drive deck easy worm gear failure everytime. never did get on with the panasonic g mech or the charly .god bless em