Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: AndyH on July 26, 2007,06:58:51

Title: Bush WS6671 Field Collapse
Post by: AndyH on July 26, 2007,06:58:51

Bush WS6671 with field collapse.

Initially an intermittent fault - would either switch on with full picture and then collapse after a 5-10 minutes OR switch on with collapsed field but restore after 5-10 minutes.

Now always collapsed at switch on. Normal picture can usually be temporarily restored by gentle tapping on the SCART connector.

This suggests a bad joint/pcb problem rather than component failure - but any suggestions on precisely where (around which components) to look for this?

Title:
Post by: mulja on July 28, 2007,10:06:06

Bush tv chassis 11ak19:
Check repair tips here for vestel
11ak19
http://www.download.nitd.co.uk/page.php?30

But i think just resolder frame chip .

Title:
Post by: steph. on October 11, 2007,15:45:53

check the h-dy leads on top of tube neck for loose lead. Had it a few times.