Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: JAYROD on January 15, 2011,07:49:34

Title: PHILIPS 32PF9631D/10. IN PROTECT MODE ?
Post by: JAYROD on January 15, 2011,07:49:34

Hi, when this lcd is switched on the green led comes on and then it immediately turns to red. The red led will give one quick flash followed by a 3 sec pause and then one longer flash which repeats.
If i put the tv in to service default mode by shorting the two solder pads the power supply runs normally and the green led stays on but no sound or picture and no inverter operation.
 
   Thanks phil.