Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: quak on January 23, 2011,21:38:44

Title: sanyo ce532wsd7-13 vestel problems
Post by: quak on January 23, 2011,21:38:44

hi, i have a  sanyo ces32wsd7-13 tv with a standby fault, board inards are vestel,  avi board is 17MB22-2 021106 and psu 17PW20 V2. set switches on ok but switching set to standby with remote your left with blinking red standby led and set will not switch back on unless switched off at mains, psu is ok, 24LC02 prom chip is ok, both have been tested on different sets so im left with a fault on main board, any ideas?

Title: Re: sanyo ce532wsd7-13 vestel problems
Post by: lignitos on May 14, 2013,14:49:09

Quote from: quak on January 23, 2011,21:38:44

hi, i have a  sanyo ces32wsd7-13 tv with a standby fault, board inards are vestel,  avi board is 17MB22-2 021106 and psu 17PW20 V2. set switches on ok but switching set to standby with remote your left with blinking red standby led and set will not switch back on unless switched off at mains, psu is ok, 24LC02 prom chip is ok, both have been tested on different sets so im left with a fault on main board, any ideas?

Hello Did you ever fixed this tv? what eas the problem,because I have the same problem and info appreciated please.

Title: Re: sanyo ce532wsd7-13 vestel problems
Post by: astracat on May 15, 2013,16:18:38

hi ,have you checked to make sure no timer function been set,had one with same problem removed timer setting cured it
regards
astracat

Title: Re: sanyo ce532wsd7-13 vestel problems
Post by: jimca007 on May 15, 2013,19:38:00

this is quite handy to read thro. for 17pw20 faults .
See attachment