Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on January 26, 2011,06:19:13

Title: sharp lc37p55
Post by: WILLYAM1 on January 26, 2011,06:19:13

hi to all.
problem is.
by power with stby power in top of tv relay click and after a few sec relay clicks again  no stbyled.
when push and hold the stby botton tv works fine and when rereasing relay clics and tv is off no red stbyled.
did the reset no cure.
help.
willyam

Title: Re: sharp lc37p55
Post by: sparky on January 26, 2011,07:33:36

hi
have you checked the earthing screws on inverter panel
if loose will trip off
dave

Title: Re: sharp lc37p55
Post by: Kilroys on January 26, 2011,08:39:22

Change this QSW-P0035GEZZ

Title: Re: sharp lc37p55
Post by: WILLYAM1 on January 26, 2011,13:42:11

thanks sparky  and kilroys.
i check earthing screws in inverter all ok.
i will change the stby botton as you kilros says.
did you have the same problem??.
i notice that there  is no signal to the inverter.
signal apear only when stby botton is constentetly pushed and back light and screen apear.
tried sevarel time the reset procedur no cure.any other suggestion?.
willyam1.
ic in inverteris bd9777

Title: Re: sharp lc37p55
Post by: Kilroys on January 27, 2011,03:05:06

Yes not only in P55 also in
LC32,37GA8 and LC32,37GA9 model
Same switch

Title: Re: sharp lc37p55
Post by: WILLYAM1 on January 27, 2011,07:27:41

thank you kilroys.
i will order  it  and keep you posted.
willyam1

Title: Re: sharp lc37p55
Post by: WILLYAM1 on February 01, 2011,07:17:04

Thanks to kilroys.
put today a new stby switch.
tv works great.
willyam1. :08: