Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: sinclairtv on February 04, 2011,13:41:34
-
A customer phoned to say her 40" Sammy was going off so mentally rubbing my hands I quoted her for the repair. Turns out it wasnt the usual type of PSU but a PSU/inverter combi. I thought that the mains input socket was faulty so I removed the PSU. BIG MISTAKE as all the tubes then came out of the inverter board.
I had to replace the panel, turn set on to back and completely dismantle screen to pop the tubes back into the sockets. I really dont know how you are supposed to remove the PSU without the inverter as they are attached.
-
thank for the warning
:08:
how about a pic of the inards if youve still got the set,may help my memory as im sure to forget the warning and do the same when i see one
thanks
daz
-
Any more info on this PSU/Inverter combi, only seen smaller sets with this type, code? photo?
Found no info on the web. :brinda:
-
Are we talking about power/inverterboard BN44-00264C.
Screw off 4 black and 1 blank then push the board against the mainboard,
not the small ones that is for the tubes holder.
-
:c017: Kilroys for the info, I've located a schematic, check downloads if its not there, I'll upload.
Frank
-
Thats the pic of the board..I didnt take a photo, I was just glad to get it off the bench!
-
Hi Sinclairtv,
Did you make a pound ? hope so - few piccies and such - ah well - these glib youngsters - Chris
-
I know this an old post However this board is easily removed by taking out the mounting screws and then sliding the board to the left :) I guess originally you tried removing the board directly towards you which would have caused the issues you describe!
So anyone else trying to remove psu/inverter follow this advice :)
Just had two Samsungs both with the psu so a dab hand with removing them :)
For anyone interested had this psu blowing 3.15A fuse turned out following items blown as a result of ic going belly up!
ICM801 ICE3BR1065JF
CM806 1KV 100Pf
RM831 1w 0.4R
DM808 1N4148
Just waiting for parts to arrive....
-
Yeah I know now how to remove the panel. Was a learning curve anyway :72:
-
I know what you mean!
Well good news the psu parts arrived and now its all working :)