Mulja tv repair portal

Spares => Spares to buy => Topic started by: epi on February 07, 2011,07:17:50

Title: VIT68001.95 REV:0 Inverter
Post by: epi on February 07, 2011,07:17:50

Hi,

Looking for a VIT68001.95 REV:0 Inverter for a Techwood TK3208HDTDT

Frank

Title: Re: VIT68001.95 REV:0 Inverter
Post by: Turnip on February 08, 2011,12:27:05

Hi Frank,

Don't have one myself - Think board is a CMO + (whatnot)

Folks might have it listed that way, as I would - if I had one - all the best - Chris.

PS - Nice Piccy

Title: Re: VIT68001.95 REV:0 Inverter
Post by: epi on February 08, 2011,14:30:09

Hi Chris, located one at jimmies for near 40pds plus pp, others have it for over 90pds, here I used to get them for 35€ but they've run out, if customer clears the repair I'll order.
Set is Vestel:-
Main - 17MB12-2
PSU - 17PW20.1
Inv: VIT68001.95 REV:0

all the best
Frank

Title: Re: VIT68001.95 REV:0 Inverter
Post by: epi on February 08, 2011,14:52:08

Don't see CMO anywhere but here is the sticker:-
CPT 320WF01SC

Title: Re: VIT68001.95 REV:0 Inverter
Post by: janongpao on February 09, 2011,03:36:37

Quote from: epi on February 07, 2011,07:17:50

Hi,

Looking for a VIT68001.95 REV:0 Inverter for a Techwood TK3208HDTDT

Frank
[/quote

VIT68001.95 REV:0  buy link:
http://www.aliexpress.com/fm-store/903701/210650501-416637913/VIT68001-95-REV-0-INVERTER-FOR-LCD-SCREEN-CPT320WF01SC-Please-read-the-product-description-before-deciding.html

http://www.aliexpress.com/fm-store/903701

Title: Re: VIT68001.95 REV:0 Inverter
Post by: Turnip on February 10, 2011,11:33:08

Hi again Frank,

Noticed that CPT is usually Darfon but the numbers were pure CMO - perhaps they're brothers-in-trade  - Chris.

Title: Re: VIT68001.95 REV:0 Inverter
Post by: epi on February 10, 2011,14:36:19

Hi Chris,
Looked into Darfon but there Inverter page is unavailable at the moment.
The page below is interesting if you don't have it listed. May have a go at trying to repair the board (when I get back to work, on a forced holiday after small operation), maybe one of those 22pF¿? caps in the return circuit o/c. On another similar VIT board had high resitence in the output winding of one of the transformers, instead of aprox 1K had over 2K, in the one I have did check all the transformers and they seem ok.
http://www.allmatrix.fr/
al the best
Frank